收藏本站
Getting Started
2.3
2-2
Quick Start
The STK500 starter kit is shipped with an AT90S8515-8PC microcontroller in the socket
marked SCKT3000D3. The default jumper settings will allow the microcontroller to exe-
cute from the clock source and voltage regulator on the STK500 board.
The microcontroller is programmed with a test program that toggles the LEDs. The test
program in the AT90S8515 is similar to the example application code described in Sec-
tion 9. Connect the LEDs and switches and power up the STK500 to run the test
program in the AT90S8515.
Use the supplied 10-pin cables to connect the header marked “PORTB” with the header
marked “LEDS”, and connect the header marked “PORTD” with the header marked
“SWITCHES”. The connections are shown in Figure 2-1.
An external 10 - 15V DC power supply is required. The input circuit is a full bridge recti-
fier, and the STK500 automatically handles both positive or negative center connectors.
If a positive center connector is used, it can be impossible to turn the STK500 off since
the power switch disconnects the GND terminal. In this case, GND can be supplied
through the RS-232 cable shield if connected or through alternative GND connections.
Connect the power cable between a power supply and the STK500. Apply 10 - 15V DC
to the power connector. The power switch turns the STK500 main power on and off. The
red LED is lit when power is on, and the status LEDs will go from red, via yellow, to
green. The green LED indicates that the target V CC is present. The program now run-
ning in the AT90S8515 will respond to pressed switches by toggling the LEDs.
Figure 2-1. Default Setup of STK500
The starter kit can be configured for various clock and power sources. A complete
description of the jumper settings is explained in paragraph 3.8 on page 3-15 and on the
reverse side of the starter kit.
AVR STK500 User Guide
1925C–AVR–3/03
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
ATSTK526 KIT STARTER FOR AT90USB82/162
ATSTK600 DEV KIT FOR AVR/AVR32
ATXMEGAB1-XPLD KIT EVAL FOR ATXMEGAB1
AUIR2085S IC DVR HALF-BRDG SELF OSC 8SOIC
AUIRS2003S IC DRVIER HALF-BRIDGE 8SOIC
AUIRS2004S IC DRVIER HALF-BRIDGE 8SOIC
AUIRS2112S IC DRIVER HIGH/LOW SIDE 16SOIC
AUIRS2113S IC DRIVER HIGH/LOW SIDE 16SOIC
相关代理商/技术参数
ATSTK500/IAR-C 制造商:Atmel 功能描述:STK500 DEV KIT WITH IAR C
ATSTK501 功能描述:插座和适配器 Expansion module for STK500 Starter Kit RoHS:否 制造商:Silicon Labs 产品:Adapter 用于:EM35x
ATSTK502 功能描述:插座和适配器 Expansion module for STK500 Starter Kit RoHS:否 制造商:Silicon Labs 产品:Adapter 用于:EM35x
ATSTK503 功能描述:插座和适配器 Expansion module for STK500 Starter Kit RoHS:否 制造商:Silicon Labs 产品:Adapter 用于:EM35x
ATSTK504 功能描述:插座和适配器 Expansion module for STK500 Starter Kit RoHS:否 制造商:Silicon Labs 产品:Adapter 用于:EM35x
ATSTK505 功能描述:插座和适配器 Expansion module for STK500 Dev Board RoHS:否 制造商:Silicon Labs 产品:Adapter 用于:EM35x
ATSTK520 功能描述:开发板和工具包 - AVR AVR Starter Kit Ext 8K FLASH 3PSC RoHS:否 制造商:Arduino 产品:Evaluation Boards 工具用于评估:ATMega32U4 核心:AVR 接口类型:I2C, UART, USB 工作电源电压:6 V to 20 V
ATSTK521 功能描述:子卡和OEM板 ATSTK500 expansion module for AT90PWM81 RoHS:否 制造商:BeagleBoard by CircuitCo 产品:BeagleBone LCD4 Boards 用于:BeagleBone - BB-Bone - Open Source Development Kit